PLACE DIRTY WATER TANK IN
BASE OF CLEANER
1. Place carpet cleaner
on a flat surface.
2. Hook the front of the
tank into the base.
Make sure the tabs on
the bottom of the tank
are latched.
3. The nozzle should be
flush with the base. If
it’s not, this will result
in poor water pickup.
4. Now place the rear
of the tank into the
base of the cleaner.
Push handle down
until it clicks.
IMPORTANT
You will hear a noticeable change in the pitch of
the cleaner. This indicates a need to empty the
dirty water tank.
WARNING
To reduce risk of personal injury -
unplug cleaner before servicing. Do
not use any chemicals when cleaning.
HOW TO
15
Comments to this Manuals